Pure Gas Testing2023-01-11T13:54:42-06:00

Pure Gas Testing

Trace Analytics, LLC provides analyses for pure gases used in a variety of industries. Pure gas testing helps manufacturers meet their purity requirements.

Contact the compressed air testing experts at Trace Analytics.

Testing can include gas purity by difference e.g. the pure gas concentration is determined to ± 0.3% absolute, then all other determined gases are subtracted from 100.00% to arrive at the reported value.
We provide Pure Gas Testing for the following gases:

  • Argon
  • Nitrogen
  • Nitrous Oxide
  • Oxygen

Impurity Testing – Inert Gases
Impurities such as oxygen, nitrogen, carbon monoxide, carbon dioxide, total volatile hydrocarbons, halogenated hydrocarbons, and water can be determined for the above pure gases. We can also provide analyses of particles, water, and oil for pure gas systems.

The following are gas specifications commonly used. We can also provide a custom specification based on your requirements.

Pure Gases - Selected Air Quality Specifications
AIR QUALITY SPECIFICATION THC CO CH4 CO2 H2O DP, °F O2 N2 OIL ODOR OTHER
CGA G-4.3-2007 Type I Grade D Oxygen 40 N/A N/A N/A 50 -54.5 99.5 N/A 0 None N/A
CGA G-10.1-2008 Type I Grade B Nitrogen N/A 10 N/A N/A N/A N/A 0.1 99.0(N) N/A N/A N/A
Commercial Item Description, CID A-A-59503C, Nitrogen, Type I, Grade B 50 N/A N/A N/A 26 -64 0.5 99.5(N) N/A No Odor Particulate Matter Maximum Dimension, µm (M)
50
IEST-STD-CC1246D-2002 Levels 100 and A/100(I) N/A N/A N/A N/A N/A N/A N/A N/A 100 (M1) N/A No. Particles 5 µm Dia. and Larger No. Particles 15 µm Dia. and Larger Additional Particle Size Ranges Below
1780 264 N/A
MIL-PRF-27401F-2008 Nitrogen Grade A Type I (N1) 58.3 N/A N/A N/A 26.3 -63.5 0.5 ≥99.5 N/A N/A Impurities, ppmv (M3)
≤5,000
USP Nitrogen 99 Percent-2007 N/A 10 N/A N/A N/A N/A ≤1.0 ≥99 N/A None Discernable N/A
USP Oxygen 99 Percent-2004 N/A 10 N/A 300 N/A N/A 99.0-100.0 N/A N/A N/A N/A
THC = Total Gaseous Hydrocarbons, ppmv
CO2 = Carbon Dioxide, ppmv
O2 = Oxygen, volume %
HS = Halogenated Solvents, ppmv
CO = Carbon Monoxide, ppmv
H2O = Water, ppmv
N2 = Nitrogen, volume %
Odor = Odor as supplied by customer
CH4 = Methane, ppmv
DP = Dew Point, °F at 0 psig
Oil = Oil Mist & Particulate, mg/m3
Air & Gas Specifications referenced above may be viewed and/or purchased from:
CGA - Compressed Gas Association U.S. Navy Dive Manual U.S. Pharmacopeial Convention

Industries We Serve

trace analytics - the compressed air testing lab

Testing Made SimpleAccurateEasy

Trace Analytics’ laboratory is accredited by the American Association for Laboratory Accreditation. We use state-of-the-art lab equipment that allows us to analyze hundreds of compressed air and environmental samples daily. The result is consistency, accuracy, precision, and rapid turnaround. Trace is an A2LA accredited laboratory complying with ISO 17025, certificate #0322-01.

Trace Analytics Blog

December 2020 IFSQN Webinar: “Microbial Testing in Ambient Air”

The International Food Safety And Quality Network hosts a monthly webinar for food manufacturers called “Food Safety Fridays.” In the last Food Safety Fridays of 2020, Trace Analytics’ Lab Director Maria Sandoval hosted a webinar discussing the importance of microbial testing in ambi [...]

Ambient Air Testing for Microorganisms

Microbes are ubiquitous, they’re all around us all of the time. This year, microbes have made some big headlines such as the COVID-19 pandemic and the multi-million-dollar Listeria contamination recall at Texas’ Blue Bell Creamery. Microorganism contamination can wreak havoc on compa [...]

Determining Moisture Content in Compressed Breathing Air Systems

Excess moisture in a compressed breathing air system can cause significant problems for our customers. The limit for water vapor in most specifications is all about preventing the freezing of the regulator in an SCBA. While water vapor doesn’t hurt the individual, not having air to b [...]

Go to Top